HOME
Product Listing
Special Test Equipment
"The One-Stop Hydraulic Shop"
1328 W. Slauson Ave. Los Angeles, CA 90044-2824 USA
(323)778-8900, FAX (323)778-6725
Please visit www.americanlabs.com for more listings.


Specials
Specials

Products
Products

6s.jpg - 4.09 K
Industrial

Test Stands
Test Stands

Components
Components

Mules
Mules

Aerospace/Aircraft
Aircraft/
Aerospace

Power Supplies
Power
Supplies

Hydraulic Pumps
Hydraulic
Pumps

SPFX
Motion
Picture
Special
Effects


We custom design and build special test equipment based on YOUR specific function. The following are a few examples.

(More to come, so please keep checking back with us.)
CATEGORIES:
Test Stands
Power Units
Pumps/Motors
Mules
Carts
Special Test Equipment


ACU-101 Air Conditioning Unit BBS-FB-101 Brake Bleed Set
C-101 Worthington Air Compressor C-102-BH 100 kw Generator
C-103-GV-V Compressor - Air CHDC-101 Central System Five Station Distribution & Control Unit
DWU-101 Distilled Water Unit DYN-101 100 Horsepower Dynamometer Reliance
DYN-102 Air Dynamometer EL-10V Engine lift type 4000A
ETM-101 Electronic Torque Meter F-101 Purolator Filters
GGBT-101 Gear Box Tester Generator GRDR-101V Westinghouse Gear Box
HPS-144 Central Hydraulic Power Unit INV-101 Inverter Solid State Static Frequency
LB-103 Load Bank Bench Test Type LB-106 Load Bank Type A/M 24-T8
LB-107 "DUMMY LOAD KIT" LB-108 Load Bank Tester TYPE A1A
LB-109 "DUMMY LOAD" Electrical OIL-RESV.CSD Portable Oil Reservoir
OTT-101 Optical Torque Tester PRES-RED-101 Pressure reducing station
PURG-101 Purging Unit Rocket Engine ST-101 Air Tank - Steel
TAHC-101 Environmental Chamber TCMTM-101 Turbo Compressor Mobile Testing Machine
TCO-101 Temperature Chamber Oven TCU-101 Temperature Conditioning Unit
V-101 Annin Valve VDR-101 U.S. Motors Vari-drive



ACU-101 Air Conditioning Unit

Mobile MFGR. Acme Industries PN 305 AS Type NR.5C 22 tons cooling 100 lbs.min. air flow 3 PSI air pressure volt (AC only) 440 v. 3 ph. 60 cyc. watt 67.2 kw

Back to Top I.D. #ACU-101 (100)



BBS-FB-101 Brake Bleed Set

FILLER & BLEEDER HYDRAULIC SYSTEM Originally designed for C130H Support PN 3402684-39 6 ft. high pressure hose 5000 PSI Gauge with metal storage case

Back to Top I.D. #BBS-FB-101 (180)



C-101 WORTHINGTON Air Compressor

100 HP 14 X 13 HB single stage horizontal power driven feather valve compressor 100 PSI with inner cooler max. 400 deg. F. outlet

Back to Top I.D. #C-101 (95)



C-102-BH 100 kw Generator

460 VAC 60 CYCLE Waukesha Diesel

Back to Top I.D. #C-102-BH (191)



C-103-GV-V Compressor - Air

2100 CFM 14.5 intake PSIA 3560 RPM discharge: 125 PSIG Ingersoll Rand.
500 HP motor rated.

Back to Top I.D. #C-103-GV-V (201)



CHDC-101 Central System Five Station Distribution & Control Unit

Designed to accept single input or dual input source of hydraulic power sharing a common reservoir and provide up to five (5) independent filtered flow and pressure control circuits. Available in either Red Oil or Skydrol service medias portable type housed in all steel structure, mounted on heavy duty casters. Re-manufactured and warranteed. APPLICABLE TO MILITARY AND COMMERCIAL USE...NEARLY ALL AIRCRAFT. Data sheets available on request.

Back to Top I.D. #CHDC-101 (131, 132)



DWU-101 Distilled Water Unit

With 30 gallon fiberglass tank, hinged top All stainless steel tubing single phase water pump to transfer water. Water purification filters included. Stainless steel valving Unused, surplus

Back to Top I.D. #DWU-101 (49)



DYN-101 100 Horsepower Dynamometer Reliance

Variable speed with MG set and control panel. Toledo Scale

Back to Top I.D. #DYN-101 (19)



DYN-102 AIR DYNAMOMETER

General Electric PN 21C2027-010 Blower used for GSE unit to support T58/T64

Back to Top I.D. DYN-102 (171)



EL-10V Engine lift type 4000A

Originally used for T56 engine (C130 aircraft support work)

Back to Top #EL-10V (43)



ETM-101 Electronic Torque Meter

High speed high torque bi-directional. Complete with digital meter Eaton Model 615K-111 Strain gauge device Not an in-flight unit rated O-10,000 in lbs. torque O-20,000 RPM

Back to Top I.D. #ETM-101 (139)



F-101 Purolator Filters

NEW SURPLUS 40 AND 80 GPM

Back to Top I.D. #F-101



GGBT-101 Gear Box Tester Generator

Western Aircraft for Grumman OV-1 Aircraft Observation M/N 44135R1 accessory drive gear

Back to Top I.D. #GGBT-101 (104)



GRDR-101V Westinghouse Gear Box

Pinion speed 3000/9000 225 HP service 45 gallon cap. type SW size 30-4XPTPSW Style 1-LA-14300 Ratio 3.667 58" wide 42" deep 61" ht. shaft size 6" dia. 6 bolt A.N.D. output pad

Back to Top I.D. #GRDR-101V (155)



HPS-144 Central Hydraulic Power Unit

72 GPM 250 HP MOTOR Unit has motor reduced voltage starters, Vickers boost pump, circulation pumps, Denison 46 series Main pump

Back to Top I.D. #HPS-144 (68)



INV-101 Inverter Solid State Static Frequency

3 PH. 400 HZ. Mfgr. Basler Electric Company type 36513 PN 57500-100 Requires input: 32 vdc 180 ac 115 vac with cooling fan input: 50/60 hz. output: 3600 v 115/200 vac 400 hz. unit includes meters 22" w x 32 Lg. x 37" ht. Call for more data

Back to Top I.D. INV-101 (102)



LB-103 Load Bank Bench Test Type

AC/DC Type L-1A PN 56F21 Mfgr. Ram Meter load switches 10-20-100-200 amp DC with variable load Control O-"100%" DC load circuit AC load circuit: with variable load rheostat O-"100%" and load switches 1-5-10-50 amps. AC single or 3 phase 5.5 KV

Back to Top I.D. #LB-103 (35)



LB-106 Load Bank Type A/M 24-T8

120 KVA 28 vdc O-1500 amps wired for split bus unit incorporates simulated 28 vdc aircraft servicing load control panel O-1500 amps with O-50 amp control by Variac

Back to Top I.D. LB-106 (98)



LB-107 "DUMMY LOAD KIT"

(LOAD BANK) Balanced three phase, four wire resistive type with an approximate 50 kw rating. It is equipped with a voltage change board that permits operation at 120/208 or 240/416 volts. Unit has incorporated within it an automatic load removal circuit that will automatically remove the dummy load from the generator set if the generator set exceeds approximately 50 kw. It is provided with a load selector switch that permits application of the approx. 50 kw load in increments of approx. 12.5 kw

Back to Top I.D. #LB-107 (169)



LB-108 Load Bank Tester TYPE A1A

By Lumen Inc. Tests AC generators of the 120-208 volt 3 phase loads magnitudes within 1.1 to 40 kvar (O.5 to 60 kw may be applied) with meters and switches All steel housing on wheels or on skids 44 inch lg. 35 inch w 39 in. ht. approx.

Back to Top I.D. #LB-108 (179)



LB-109 "DUMMY LOAD" Electrical

Teledyne Inet Load Bank 3 phase 120/208 V 400 hz. 5 position, selector switch PN 11A972 Mfgr. Power Paragon, Power Systems Group

Back to Top I.D. #LB-109 (202)



OIL-RESV.CSD Portable Oil Reservoir and Cooling unit for Constant Speed Drives

PN PE4579 designed to cool, control and monitor the oil supply and provide generator case vent air pressure required for limited operational tests of the CSD components.

Back to Top I.D. #OIL-RESV.CSD (150)



OTT-101 Optical Torque Tester

Mfgd. by P.A. Sturdevant M/N OTT-500 Hydraulic and air operated range O-5000 inch labs. torque 1/4 of IT accuracy. Used

Back to Top I.D. OTT-101 (58)



PRES-RED-101 Pressure reducing station

(Fuel Service) with stainless steel components. Ball valves, Check valve, Safety relief valve, Y strainer Pressure reducer. Adjustable - used as test Section Two (2) complete systems One (1) also available for parts only

Back to Top I.D. #PRES-RED-101 (37)



PURG-101 Purging Unit Rocket Engine

Includes Kinney pump KC2 1/4 HP Motor HP particle filter, thermocouple thermometer, Marotta solenoid valves, Grove regulators, switches Ask for more details and photo

Back to Top I.D. PURG-101 (74)



ST-101 Air Tank - Steel

600 PSI Skid mounted. 20 ft. lg. 3 ft. dia. Can be used with compressor (I.D. #C-101 above) as system for testing Airesearch valves. (Unit removed from service in FBO Air Flow Test Station)

Back to Top I.D. #ST-101 (95)



TAHC-101 Environmental Chamber

By Standard Environmental MDL STAH/3 FH Temperature/Humidity/Vacuum Honeywell instrumentation 18 x 18 x 18 Inside dimensions Used, good

Back to Top I.D. #TAHC-101 (204)



TCMTM-101 Turbo Compressor Mobile Testing Machine

PN 904382-1-1 Originally manufactured by AiResearch, Div. of Garrett Corp. provides a method of holding turbo compressor for functional testing Interface connections to the testing machine provide for connection to a test facility for speed pick-up, electrical power, temp. read-out, pressure sensing and for an air supply for testing turbo compressor.

Back to Top I.D. #TCMTM-101 (198,199)



TCO-101 Temperature Chamber Oven

M/N POM206PRBIX Blue M Manufacturing 2 x 2 x 2 size chambers and all controls Floor mount style Offered as is or can be calibrated

Back to Top I.D. #TCO-101 (170)



TCU-101 Temperature Conditioning Unit

"FTS BURN IN BATHS" for printed circuit board work Liquid oven B/1 50 pin connectors on sink cover features: stir control, liquid level float, over temp. power switch reclaim light, low fluid with light, cool toggle switch with light sink 12" x 12" x 29" Refrig. R12

Back to Top I.D. #TCU-101 (108)



V-101 ANNIN VALVE

3000 PSI 3" flanged mount

Back to Top I.D. #V-101 (95)



VDR-101 U.S. Motors Vari-drive

25 HP 220/440 vac single head output with 6" 6 bolt pad. Explosion proof motor, starter and controls. Ideal for fuel service for testing fuel pumps. Speed range O-5000 Speed control is pneumatically controlled Portable on casters

Back to Top I.D. #VDR-101 (2 VDR-10-90)




(323) 778-8900 or FAX (323) 778-6725
Or e-mail us at:
mikecurry@americanlabs.com



Specials
Specials
Industrial Test Stands Components Products
Hydraulic Pumps Aircraft/Aerospace Power Supplies
Mules Motion Picture Special Effects Client Comments




Copyright © 2000 American Lab and Systems, U.S.A.
All Rights Reserved. No portion of this site may be copied, retransmitted, reposted, duplicated or otherwise used without the express written permission of American Lab and Systems.